Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error EB2

The supply voltage is too high.

The supply voltage is too high.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error EB2
Error codeEB2Washer

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Check for any power surges or issues with your home's electrical supply.

  2. 2
    Check 2

    If the issue is ongoing, have an electrician check the voltage at the outlet.

A quick explanation

What does EB2 mean?

The supply voltage is too high.

The answer you came for

How to fix Electrolux washer error EB2

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. First, unplug the washer from the wall outlet to ensure your safety. Turn off the water supply to the washer as an extra precaution.

  2. 2

    Step 2

    2. To access the main control board, you will likely need to remove the top panel of the washer. This is typically secured by screws at the back of the machine.

  3. 3

    Step 3

    3. Locate the main control board. It is usually housed in a plastic casing. Take a clear picture of the wire connections before you disconnect anything to ensure you can reconnect them correctly.

  4. 4

    Step 4

    4. Carefully disconnect all the wire harnesses from the old control board. Then, remove the screws or release the clips holding the board in place and remove it.

  5. 5

    Step 5

    5. Install the new main control board, securing it with the screws or clips. Reconnect all the wire harnesses by referring to the picture you took earlier.

  6. 6

    Step 6

    6. Reattach the top panel of the washer and secure it with the screws.

  7. 7

    Step 7

    7. Plug the washer back into the power outlet and turn the water supply back on. Run a test cycle to ensure the new control board is functioning correctly.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Supply voltage is too high
  • Power surge

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Electrolux Washer error EB2 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Sep 27, 2026 ยท Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.