Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error E99

Incongruence between the sound and light module and the main board.

Incongruence between the sound and light module and the main board.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error E99
Error codeE99Washer

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Disconnect the washer from the power outlet for a few minutes, then reconnect it.

  2. 2
    Check 2

    Unplug the appliance and inspect the wiring between the audio unit and the main electronic unit for any loose or damaged connections.

  3. 3
    Check 3

    Visually inspect the sound block for any signs of damage.

A quick explanation

What does E99 mean?

Incongruence between the sound and light module and the main board.

The answer you came for

How to fix Electrolux washer error E99

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washer from power by unplugging it from the wall outlet to ensure safety.

  2. 2

    Step 2

    2. Remove the top panel of the washer. This is typically secured by two screws on the back of the machine. Slide the panel back and lift it off.

  3. 3

    Step 3

    3. Locate the main control board, usually housed in a plastic casing near the front control panel, and the sound/light module.

  4. 4

    Step 4

    4. Carefully disconnect the wiring harness that connects the main board to the sound and light module. Pay close attention to the connector clips to avoid damage.

  5. 5

    Step 5

    5. Remove the old loudspeaker and wiring harness. The loudspeaker may be attached with small screws or clips. Replace them with the new parts.

  6. 6

    Step 6

    6. Securely connect the new wiring harness to both the main control board and the new loudspeaker/light module, ensuring all connections are snug.

  7. 7

    Step 7

    7. Reassemble the washer by replacing the top panel and securing it with the screws. Plug the washer back in and run a test cycle to confirm the error is resolved.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Communication error between the sound block and the main electronic unit
  • Faulty sound block
  • Faulty main electronic unit

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Electrolux Washer error E99 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Sep 27, 2026 ยท Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.