Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error E5

Problem with the temperature sensor (NTC).

Problem with the temperature sensor (NTC).

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error E5
Error codeE5Washer

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Enter Diagnostic Mode: Consult your washer's manual to learn how to enter the diagnostic mode to get the full, more specific error code.

  2. 2
    Check 2

    Power Cycle the Washer: Turn the appliance off and unplug it for several minutes before restarting to see if the error clears.

A quick explanation

What does E5 mean?

Problem with the temperature sensor (NTC).

The answer you came for

How to fix Electrolux washer error E5

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washing machine from its power source completely.

  2. 2

    Step 2

    2. To access the temperature sensor (NTC), you will likely need to remove the front or rear access panel of the washer.

  3. 3

    Step 3

    3. The sensor is typically located near the heating element at the base of the wash tub. It is a small probe-like component with a wire connector.

  4. 4

    Step 4

    4. Carefully disconnect the wiring harness attached to the sensor.

  5. 5

    Step 5

    5. Use a multimeter set to measure resistance (Ohms) to test the sensor. A healthy sensor will show a reading that changes with temperature; an infinite or zero reading indicates a faulty sensor.

  6. 6

    Step 6

    6. If the sensor is bad, remove it from its housing (it may be held by a clip or a small bolt) and install the new one, ensuring a snug fit.

  7. 7

    Step 7

    7. Reconnect the wiring harness, secure the access panel, and plug the washer back in to see if the error is resolved.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Indicates a potential motor or motor control board issue, requiring retrieval of a more specific E50-series code

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Electrolux Washer error E5 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Sep 27, 2026 ยท Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.