Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error E35

The water level is too high.

The water level is too high.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error E35
Error codeE35Washer

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Turn off the water supply. If water continues to enter the drum, the water inlet valve is likely faulty and needs replacement.

  2. 2
    Check 2

    Check the air hose connected to the pressure sensor for any blockages, kinks, or damage.

  3. 3
    Check 3

    The pressure chamber where the hose connects to the tub can become clogged with detergent residue. Clean it out.

A quick explanation

What does E35 mean?

The water level is too high.

The answer you came for

How to fix Electrolux washer error E35

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. First, unplug the washing machine to prevent any electrical accidents.

  2. 2

    Step 2

    2. Locate the water inlet valve at the back of the machine where the water hoses connect. Inspect it to see if it's stuck open, which can cause overfilling.

  3. 3

    Step 3

    3. Disconnect the water hoses and check the small filter screens inside the valve connections for debris; clean them if necessary.

  4. 4

    Step 4

    4. Access the pressure switch by removing the top panel. Check the air hose connected to it for blockages or damage.

  5. 5

    Step 5

    5. If the valve and hose seem okay, the pressure switch is the next part to check. It may not be correctly sensing the water level.

  6. 6

    Step 6

    6. Replace the pressure switch by disconnecting its wires and hose, removing the old part, and installing the new one.

  7. 7

    Step 7

    7. If the problem persists after replacing the pressure switch, the water inlet valve is likely faulty and needs to be replaced.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Water level sensor detects too much water
  • Faulty water inlet valve (stuck open)
  • Clogged pressure switch hose or pressure chamber

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 134371220

Price noted in the current guide: $20-$90

Why this part is shown: It is associated with Electrolux Washer error E35 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Sep 27, 2026 ยท Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.