Electrolux Washer error code
Electrolux Washer Error C6
Electrolux washer code C6 indicates pressure switch fault. Audited diagnosis findings: blocked or kinked pressure switch hose; loose wiring connection to the pressure switch; clogged air dome.
Electrolux washer code C6 indicates pressure switch fault. Audited diagnosis findings: blocked or kinked pressure switch hose; loose wiring connection to the pressure switch; clogged air dome.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Check Pressure Switch Hose: Inspect the tube connected to the pressure switch for any blockages or kinks.
- 2Check 2
Inspect Wiring: Check the wiring connections to the pressure switch.
- 3Check 3
Clean Air Dome: The air dome where the pressure switch hose connects to the tub can sometimes become clogged with detergent residue.
A quick explanation
What does C6 mean?
Electrolux washer code C6 indicates pressure switch fault. Audited diagnosis findings: blocked or kinked pressure switch hose; loose wiring connection to the pressure switch; clogged air dome.
The answer you came for
How to fix Electrolux washer error C6
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Unplug the washer from the power outlet and turn off the water supply valves.
- 2
Step 2
2. Remove the top panel of the washer, which is typically secured by screws at the back.
- 3
Step 3
3. Locate the pressure switch, a small round component with a thin tube and a wire connector, usually mounted to the top or side of the washer's outer tub.
- 4
Step 4
4. Take a photo of the connections, then carefully disconnect the wire harness and the clear air hose from the old switch.
- 5
Step 5
5. Remove the old switch (it may be held by a screw or clip) and install the new pressure switch (Part #134762010).
- 6
Step 6
6. Securely reconnect the wire harness and the air hose, ensuring the hose is not kinked or blocked.
- 7
Step 7
7. Reattach the top panel, restore power and water, and run a test cycle.
What may be causing it?
- Blocked or kinked pressure switch hose
- Loose wiring connection to the pressure switch
- Clogged air dome
- Faulty pressure switch
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 134762010
Price noted in the current guide: $25-$50
Why this part is shown: It is associated with Electrolux Washer error C6 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, FREE delivery on eligible items
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Electrolux Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.Reviewed by the Appliance Fix Guide Editorial Team
- Researched against manufacturer documentation and service literature where available.
- Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
- Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.