Bosch Washer error code
Bosch Washer Error E61
Incorrect door lock signal or door cannot be locked.
Incorrect door lock signal or door cannot be locked.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Ensure the door is firmly closed and that no laundry is caught in it.
- 2Check 2
Check the door lock mechanism for any visible damage or obstructions.
- 3Check 3
Unplug the washer for a few minutes to reset the electronics, then plug it back in.
A quick explanation
What does E61 mean?
Incorrect door lock signal or door cannot be locked.
The answer you came for
How to fix Bosch washer error E61
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Disconnect the washer from power by unplugging it from the wall outlet to ensure safety.
- 2
Step 2
2. Open the washer door and locate the metal retaining band that secures the rubber door seal (bellow) to the front panel. Carefully pry the spring-loaded band off using a flathead screwdriver.
- 3
Step 3
3. Gently peel the rubber door seal away from the front panel opening to gain access to the door lock assembly mounted on the inside of the chassis.
- 4
Step 4
4. Locate the door lock assembly. Depending on your model, it may be secured with screws or plastic tabs. Disconnect the wiring harness attached to the lock by pressing the release tab on the connector and pulling it off.
- 5
Step 5
5. Remove the old door lock assembly. If it's held by screws, remove them. If it has plastic tabs, press them in with a screwdriver while sliding the lock to release it from the mounting bracket.
- 6
Step 6
6. Install the new door lock assembly by aligning it correctly and securing it with the screws or by sliding it into place until the tabs lock. Reconnect the wiring harness, ensuring it clicks into place.
- 7
Step 7
7. Re-secure the rubber door seal onto the lip of the front panel, making sure it is evenly seated all the way around. Reinstall the metal retaining band into the groove of the seal to hold it firmly in place.
What may be causing it?
- Faulty door lock mechanism.
- Communication fault between the control board and the motor.
- Wiring issues between components.
- The door is not securely closed.
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 00612148
Price noted in the current guide: $85-$125
Why this part is shown: It is associated with Bosch Washer error E61 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, FREE delivery on eligible items
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Bosch Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.Reviewed by the Appliance Fix Guide Editorial Team
- Researched against manufacturer documentation and service literature where available.
- Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
- Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.