Skip to main content
Appliance Fix Guide

Bosch Washer error code

Bosch Washer Error E50

Motor overcurrent or general motor fault.

Motor overcurrent or general motor fault.

Updated Aug 18, 2026
Diagnose before buying a part
Bosch washer repair guide for error E50
Error codeE50Washer

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Avoid excessively large or small loads.

  2. 2
    Check 2

    Check that the thin pressure hose connected to the water level sensor is not kinked, cracked, or blocked.

A quick explanation

What does E50 mean?

Motor overcurrent or general motor fault.

The answer you came for

How to fix Bosch washer error E50

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washer from power and water supplies. Turn off the circuit breaker and shut off both the hot and cold water faucets.

  2. 2

    Step 2

    2. Remove the rear access panel of the washer by unscrewing the retaining screws.

  3. 3

    Step 3

    3. Locate the drive motor at the bottom of the drum. Carefully detach the drive belt from the motor pulley.

  4. 4

    Step 4

    4. Disconnect the wiring harness connected to the motor. Take a photo beforehand for reference.

  5. 5

    Step 5

    5. Unbolt the motor from the washer frame. It is typically held by a few bolts. Support the motor as you remove the last bolt to prevent it from falling.

  6. 6

    Step 6

    6. Install the new motor by aligning it with the mounting holes and securing it with the bolts. Reconnect the wiring harness and reattach the drive belt.

  7. 7

    Step 7

    7. Replace the rear access panel, reconnect the water hoses, and plug the washer back in. Run a test cycle to ensure the motor is functioning correctly.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Improper load size
  • Blocked or disconnected pressure switch hose
  • Faulty water level sensor (pressure switch)

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 00427040

Price noted in the current guide: $40-$80

Why this part is shown: It is associated with Bosch Washer error E50 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Bosch Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Sep 27, 2026 ยท Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.