Bosch Washer error code
Bosch Washer Error E38
The pressure chamber is blocked and requires manual cleaning.
The pressure chamber is blocked and requires manual cleaning.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Turn the washing machine off and on again to reset the control board.
- 2Check 2
Avoid overloading the machine.
- 3Check 3
If comfortable, unplug the machine and visually inspect wiring to the motor and control board for loose or burnt connections.
A quick explanation
What does E38 mean?
The pressure chamber is blocked and requires manual cleaning.
The answer you came for
How to fix Bosch washer error E38
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. UNPLUG THE WASHER: Disconnect the washing machine from both the power outlet and the water supply lines to ensure safety.
- 2
Step 2
2. REMOVE THE TOP PANEL: Locate and remove the screws at the back of the washer that hold the top panel in place. Slide the panel back and lift it off.
- 3
Step 3
3. LOCATE THE PRESSURE CHAMBER: Look for a plastic component, usually near the bottom of the tub, with a thin black or clear hose attached to it. This is the pressure chamber system, which connects to the pressure sensor.
- 4
Step 4
4. DISCONNECT AND REMOVE THE CHAMBER: Use pliers to release the clamp holding the larger hose to the tub or drain pump. Squeeze the clamp and slide it down the hose. Carefully twist the hose and chamber to detach it. Disconnect the smaller tube leading to the pressure sensor.
- 5
Step 5
5. CLEAN THE PRESSURE CHAMBER THOROUGHLY: Take the chamber to a sink. Use a small bottle brush and hot, soapy water to scrub the inside, removing all lint, sludge, and blockages. Rinse it completely until water flows through freely.
- 6
Step 6
6. REINSTALL THE CHAMBER: Reattach the pressure chamber to the tub, ensuring the clamp is securely back in its original position. Reconnect the small hose to the pressure sensor, making sure it is fully seated.
- 7
Step 7
7. REASSEMBLE AND TEST: Replace the top panel and secure it with the screws. Reconnect the water and power supplies. Run a quick wash cycle to confirm the E38 error code is cleared.
What may be causing it?
- Overloading the washer
- Loose or damaged wiring
- Faulty motor control board
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 00675654
Price noted in the current guide: $70-$110
Why this part is shown: It is associated with Bosch Washer error E38 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, FREE delivery on eligible items
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Bosch Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.Reviewed by the Appliance Fix Guide Editorial Team
- Researched against manufacturer documentation and service literature where available.
- Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
- Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.