Skip to main content
Appliance Fix Guide

Bosch Dishwasher error code

Bosch Dishwasher Error F13

Bad EEPROM Identification/Checksum error.

Bad EEPROM Identification/Checksum error.

Updated Aug 18, 2026
Diagnose before buying a part
Bosch dishwasher repair guide for error F13
Error codeF13Dishwasher

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Turn off the dishwasher at the circuit breaker for at least 10 minutes to reset the electronics.

  2. 2
    Check 2

    Test the heating element and temperature sensor (thermistor) for continuity with a multimeter.

  3. 3
    Check 3

    If other checks fail, inspect the main control board for faults.

A quick explanation

What does F13 mean?

Bad EEPROM Identification/Checksum error.

The answer you came for

How to fix Bosch dishwasher error F13

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Turn off the power to the dishwasher at the circuit breaker to ensure safety.

  2. 2

    Step 2

    2. Remove the outer door panel by unscrewing it from the inside of the dishwasher door. Then, remove the lower access panel (kick plate) below the door to gain access to the dishwasher's base.

  3. 3

    Step 3

    3. Locate the main control board, which is the electronic brain of the dishwasher. It is typically housed in a plastic case on the right side of the base.

  4. 4

    Step 4

    4. Before disconnecting any wires, take a clear photograph of the connections to the control board to use as a reference for reassembly.

  5. 5

    Step 5

    5. Carefully unplug all the wire harnesses from the old control board. Release any clips or remove screws that are holding it in place, and then remove the board.

  6. 6

    Step 6

    6. Install the new control board, making sure it is securely fastened in its housing. Using your photo as a guide, reconnect all the wire harnesses to the correct terminals on the new board.

  7. 7

    Step 7

    7. Reinstall the lower access panel and the outer door panel. Turn the power back on at the circuit breaker and run a test cycle to ensure the dishwasher is functioning correctly and the error is cleared.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Issue with the water heating system
  • Faulty temperature sensor
  • Defective heating element
  • Fault in the main control board

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 12041766

Price noted in the current guide: $150-$350

Why this part is shown: It is associated with Bosch Dishwasher error F13 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dishwasher model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dishwasher?

If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Bosch Dishwasher Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Sep 27, 2026 ยท Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.