Amana Washer Error 1H-2H-3H-UP-TO-12H-2: Meaning, Fixes, Parts & Repair Decision
Amana Washer Error 1H-2H-3H-UP-TO-12H-2 — Delay Start Timer
649 repair guides
Choose the appliance, then find the exact code. Every guide leads with what the code means, what to try first, and whether a part or replacement is worth considering.
Amana
Amana Washer Error 1H-2H-3H-UP-TO-12H-2 — Delay Start Timer
Amana Washer Error 1H-2H-3H-UP-TO-12H-3 — Delay Start Timer
Amana Washer Error 1H-2H-3H-UP-TO-12H — Delay Start Timer
Suds detection. This is an alternate code for ‘Sd’ or ‘Sud’.
Amana Washer Error ADD-GARMENT-LIGHT-ON-2 — Add Garment
Amana Washer Error ADD-GARMENT-LIGHT-ON-3 — Add Garment
Amana Washer Error ADD-GARMENT-LIGHT-ON — Add Garment
This error code is not explicitly defined as "bE" in the search results. However, error codes containing "E2" often relate…
Amana Washer Error CL-2 — Control Lock Activated
Amana Washer Error CL — Control Lock Activated
Amana Washer Error CYCLE-COMPLETE-LIGHT-ON-2 — Cycle Finished
Amana Washer Error CYCLE-COMPLETE-LIGHT-ON-3 — Cycle Finished
Amana Washer Error CYCLE-COMPLETE-LIGHT-ON — Cycle Finished
Detergent cartridge not detected in the dispenser.
Detergent cartridge not detected in the dispenser.
The detergent level in the bulk dispenser is low and needs to be refilled.
The detergent level in the bulk dispenser is low and needs to be refilled.
The detergent level in the bulk dispenser is low and needs to be refilled.
Door Lock Failure
Door Lock Failure
Lid is not locking. This could be due to an obstruction or detergent buildup.
Amana Washer Error DONE-LIGHT-ON-2 — Cycle Finished
Amana Washer Error DONE-LIGHT-ON-3 — Cycle Finished
Amana Washer Error DONE-LIGHT-ON — Cycle Finished
Indicates that the washer door is locked and cannot be opened.
Indicates that the washer door is locked and cannot be opened.
Indicates that the washer door is locked and cannot be opened.
Amana Washer Error DRN-2 — Drain Error
Amana Washer Error DRN — Drain Error
Amana Washer Error DU-2 — Door Unlock Failure
Amana Washer Error DU — Door Unlock Failure
Amana Washer Error ERR-2 — General Error
Amana Washer Error ERR — General Error
Amana Washer Error F-E-2 — System Code Error
Amana Washer Error F-E — System Code Error
Over Suds Condition
Over Suds Condition
Over Suds Condition
Items were detected in the washer during the Clean Washer cycle.
Too much residual water has been detected in the washer.
Amana Washer Error F0E9 — Unbalanced load.
Main Control Fault
Amana Washer Error F20-2 — No Water Detected
Amana Washer Error F20 — No Water Detected
Amana Washer Error F21-2 — Long Drain
Amana Washer Error F21 — Long Drain
Issue with the user interface or associated wiring.
Pressure System Fault
Pressure System Fault
Pressure System Fault
Inlet Water Temperature Fault
Inlet Water Temperature Fault
Items detected in the washer during the Clean Washer cycle.
Items detected in the washer during the Clean Washer cycle.
The door is not locking properly.
The door is not locking properly.
The door is not locking properly.
Communication error between the main control and the user interface.
Indicates a communication problem between the main control board and the user interface.
Motor Speed Sensing Error
Motor Speed Sensing Error
Motor Unable to Reach Target RPM
Motor Unable to Reach Target RPM
Issue with the appliance control unit, user interface, or associated wiring.
Related to overcurrent or undercurrent from the motor, potentially due to a defective wash plate.
Shifter error or basket speed sensor error.
Amana Washer Error F8-E1-2 — Low Flow of Water
Amana Washer Error F8-E1 — Low Flow of Water
Dispenser System Problem
Dispenser System Problem
Amana Washer Error F9-E1-2 — Long Drain Time
The FanFresh® option is activated, which periodically tumbles the load after the cycle ends
The FanFresh® option is activated, which periodically tumbles the load after the cycle ends
The FanFresh® option is activated, which periodically tumbles the load after the cycle ends
This error code is not found in the provided search results.
Amana Washer Error FC-E0-2 — A general fault code.
Amana Washer Error FC-E0 — A general fault code.
Internal Board Problem – Drive Motor
Internal Board Problem – Drive Motor
Filling or Sensing
Amana Washer Error FILL-OR-SENSING-LIGHT-ON-3 — Filling or Sensing
Amana Washer Error FILL-OR-SENSING-LIGHT-ON-4 — Filling or Sensing
Amana Washer Error FILL-OR-SENSING-LIGHT-ON — Filling or Sensing
Hot and Cold Hoses are Reversed
Hot and Cold Hoses are Reversed
Cycle Paused or Canceled
Cycle Paused or Canceled
Amana Washer Error LC-2 — Control Lock Activated
Amana Washer Error LC — Control Lock Activated
Amana Washer Error LD-2 — Long Drain Time
Amana Washer Error LD — Long Drain Time
Lid Lock Failure
Lid Unlock Failure
Lid Unlock Failure
Amana Washer Error LID-2 — Lid Open
Amana Washer Error LID-LIGHT-FLASHING-2 — Lid Open
Amana Washer Error LID-LIGHT-FLASHING — Lid Open
Amana Washer Error LID — Lid Open
Amana Washer Error LO-FL-2 — Low Flow of Water
Amana Washer Error LO-FL-3 — Low Flow of Water
Low Flow of Water
Amana Washer Error LO-FL — Low Flow of Water
Amana Washer Error LOC-2 — Control Lock Activated
Amana Washer Error LOC — Control Lock Activated
Amana Washer Error MULTIPLE-LIGHTS-FLASHING-2 — General Error
Amana Washer Error MULTIPLE-LIGHTS-FLASHING-3 — General Error
Amana Washer Error MULTIPLE-LIGHTS-FLASHING-4 — General Error
Amana Washer Error MULTIPLE-LIGHTS-FLASHING — General Error
The washer is not detecting the correct amount of incoming water.
This code indicates that the wash cycle was interrupted or paused.
Off-balance load detected.
Off-balance load detected.
The washer load is out of balance.
Amana Washer Error OL-2 — Overload
Amana Washer Error OL — Overload
Amana Washer Error PF-2 — Power Failure
Amana Washer Error PF — Power Failure
The presoak option is in progress.
Unplug the washer and turn off the hot and cold water supply valves.
This light indicates that the washer is in the rinse portion of its cycle, which is normal operation.
Recognize that a solid 'Rinse' light indicates the washer is in the rinse portion of its cycle, which is normal…
This light is not an error indicator. It is a status light letting you know the washer is currently in…
Items detected in the washer during the Clean Washer cycle.
Items detected in the washer during the Clean Washer cycle.
Amana Washer Error SD-2 — Suds Detected
Amana Washer Error SD — Suds Detected
The washer is in the process of determining the load size to adjust water levels and cycle settings accordingly.
Amana Washer Error SPIN-LIGHT-FLASHING-2 — Spinning
Amana Washer Error SPIN-LIGHT-FLASHING-3 — Spinning
Amana Washer Error SPIN-LIGHT-FLASHING-4 — Spinning
Amana Washer Error SPIN-LIGHT-FLASHING — Spinning
Amana Washer Error SUD-2 — Suds Detected
Amana Washer Error SUD — Suds Detected
Amana Washer Error UL-2 — Unbalanced Load
Amana Washer Error UL — Unbalanced Load
Do not be alarmed, this is not an error code. This light simply indicates that the washer is currently in…
This light simply indicates that the main wash portion of the cycle is in progress.
Unplug the washer from the wall outlet and turn off both the hot and cold water faucets.
This is not an error code but indicates the washer is in a recalibration mode.
High Water Temperature in Rinse Cycle
Off-Balance Load Detected
A general electronic control error.
Indicates an overload, where the load is too heavy for the washer to operate correctly.
Amana washer code F1-E2 indicates motor Control Fault. Audited diagnosis findings: motor control board failure; an item is caught between…
A water leak has been detected.
Communication error between control boards.
Motor rotor position sensor error.
Amana washer code F2E2 indicates a general fault code. Audited diagnosis findings: stuck button on the user interface; loose wiring…
Signals an issue with the user interface or its associated wiring.
Mini Dispenser issue, requires manual detergent addition.
A generic fault code where the recommended solution is to cycle the power to reset the washer's control.
Indicates a water inlet problem.
A model-specific internal washer fault.
A general error code suggesting a reset of the washer's control by cycling the power.
Relates to a motor control error.
Power loss or issue with power supply components.
Amana washer code F7E5 indicates shifter fault. Audited diagnosis findings: the shift actuator has failed and is unable to engage…
Amana washer code F7E6 indicates motor fault. Audited diagnosis findings: the main drive motor has failed; the motor run capacitor…
Motor unable to reach targeted RPM.
A general motor or drive system fault. The primary recommendation is to reset the washer by cycling the power.
Indicates an issue with the main router, user interface, or associated wiring, potentially a locked rotor.
Amana washer code F7EA indicates a general fault code. Audited diagnosis findings: temporary system fault.
This is a drive-family fault that can be triggered by an overloaded washer.
This error code indicates that the cooling fan is running at a speed that is too low, or that there…
An overflow condition has occurred due to too much water or foam.
Amana washer code F8E6 indicates a general fault code. Audited diagnosis findings: the lid was opened during a soak cycle;…
Amana washer code F9-E1 indicates long Drain Time. Audited diagnosis findings: the drain hose is obstructed or improperly installed; the…
This error code is not explicitly defined in the search results. However, the related F9E1 code indicates a long drain…
This error code is not found in the provided search results.
No fill or long fill condition.
This error code is not found in the provided search results.
Overflow condition related to the inlet valve.
This error code is not found in the provided search results.
This error code indicates a communication issue with the Wi-Fi module in the appliance.
The appliance was unable to connect to the router.
Amana washer code FH indicates a general fault code. Audited diagnosis findings: water supply faucets are turned off; kinked or…
Amana washer code LF-2 indicates long Fill. Audited diagnosis findings: water supply is not turned on; kinked or clogged inlet…
No drain. This is typically a drain pump problem or can be caused by excess suds.
Amana
Indicates that there is too much water in the appliance. This could be due to a blocked pump or a…
No specific meaning found.
Dashes in the display can indicate a control panel issue or that the dryer is in a diagnostic mode. A…
Can indicate a variety of issues, including a problem with the door switch or
Can indicate a variety of issues, including a problem with the door switch or
Can indicate a variety of issues, including a problem with the door switch or
Can indicate a variety of issues, including a problem with the door switch or water getting into the control panel.
Dashes in the display can indicate a control panel issue or that the dryer is in a diagnostic mode. A…
Amana Dryer Error 3E — Service Required.
Amana Dryer Error 6E — Service Required.
All display segments are lit up. This is a normal part of the diagnostic test mode to ensure the display…
Restricted airflow is detected. This can be caused by a clogged lint screen, a kinked or crushed vent, or a…
Indicates that the dryer vent is clogged or there is restricted airflow.
Indicates that the dryer vent is clogged or there is restricted airflow.
Indicates that the dryer vent is clogged or there is restricted airflow.
A reminder to clean the lint screen.
Dashes in the display can indicate a control panel issue or that the dryer
Dashes in the display can indicate a control panel issue or that the dryer
The dryer's control panel is locked to prevent accidental changes or use.
The main heated drying portion of the cycle is complete, and the dryer is tumbling the load without heat to…
The load is partially dry, and items that are to be hung up or ironed while still damp can be…
The dryer door is open.
The drying cycle is complete, and the load can be removed.
Indicates an issue with the thermistor, specifically an open circuit. This can be caused by a faulty thermistor or a…
Indicates an issue with the thermistor, specifically an open circuit. This can be caused by a faulty thermistor or a…
Indicates a shorted thermistor, causing the dryer to misread the temperature.
Indicates a shorted thermistor, causing the dryer to misread the temperature.
Signals that the dryer is overheating or has a temperature sensor issue, often due to a faulty thermistor or restricted…
The selected drying cycle has finished.
The dryer door is not completely closed or latched.
The dryer door is not completely closed or latched.
A general fault has been detected by the dryer's control board that requires service.
A general fault has been detected by the dryer's control board that requires service.
A general fault has been detected by the dryer's control board that requires service.
Primary control failure.
Indicates a door lock issue. The door may not be firmly shut, or there could be an obstruction.
Fault in the exhaust/outlet thermistor.
Fault in the exhaust/outlet thermistor.
The inlet thermistor is shorted.
General error requiring a power cycle.
General error requiring a power cycle.
A button on the control panel is stuck or the user interface is faulty.
Restricted airflow condition. This can be caused by a clogged lint screen, blocked door seal, or an obstructed vent.
Low or no line voltage is detected, preventing the heater from turning on.
Indicates an issue with the pressure switch.
A moisture sensor issue has been detected. This can occur if five consecutive loads are dried without the sensor registering…
Indicates a fault with the inlet thermistor (temperature sensor).
Indicates an open or shorted outlet thermistor.
The moisture sensor has not detected any data for five consecutive loads.
Indicates a problem with the heater or heater relays.
Restricted airflow is detected. This is the same as the 'AF' code and can be caused by a clogged lint…
General error requiring a power cycle.
General error requiring a power cycle.
A problem with the door switch has been detected.
Latch circuit failure.
Indicates that the door was not opened for 3 consecutive cycles.
Communication error between the main control board and the user interface (touchpad). This could be due to a problem with…
Communication error between the Appliance Control Unit (ACU) and the Human-Machine Interface (HMI).
Indicates an issue with the appliance control unit, user interface, or associated wiring.
Indicates an issue with the appliance control unit, user interface, or associated wiring.
Communication failure between the user interface board and the main control board.
Communication failure between the user interface board and the main control board.
Motor speed sensing error; the motor is not reaching the correct speed for the selected cycle.
Motor speed sensing error; the motor is not reaching the correct speed for the selected cycle.
Drain assembly failure. This indicates that the float switch is in the full position and the pump has been on…
Drain assembly failure. This indicates that the float switch is in the full position and the pump has been on…
The appliance could not connect to the router. This could be due to a
The appliance could not connect to the router. This could be due to a
The appliance could not connect to the router. This could be due to a
The appliance could not connect to the router. This could be due to a connection timeout, poor signal strength, a…
On some washer/dryer combo units, this indicates a drainage fault or a heating issue. On standalone washers, it means "Factory…
There is a heating error, potentially due to a restricted vent system or an issue with the thermistor.
The dryer is receiving low or no line voltage. This could be an issue with the home's power supply.
The control lock is engaged, preventing the dryer from starting or being operated.
The control board senses an open thermistor. The thermistor is a temperature sensor, and this error indicates it may be…
A power failure has occurred, interrupting the drying cycle.
A power failure has occurred, interrupting the drying cycle.
The dryer's automatic cycle is in the process of detecting the moisture level in the clothes.
Thermistor error. This indicates a problem with the temperature sensor.
Thermistor error. This indicates a problem with the temperature sensor.
The drying cycle has just begun, and the load is still wet.
Dashes in the display can indicate a control panel issue or that the dryer is in a diagnostic mode. A…
A general fault has been detected by the dryer's control system, which may cause it to stop mid-cycle or not…
Primary control failure.
Indicates a potential issue with the oven temperature sensor, the control, or the associated wiring.
Indicates a primary control board failure.
There may be an issue with the control unit or the associated wiring.
Indicates a potential issue with the control unit or its wiring.
A possible issue with the control unit or the associated wiring has been detected.
No voltage detected at the heater relay.
Inlet thermistor is open.
Motor drive system failure.
Keypad or communication failure between the main control board and the motor control unit.
Keyboard or user interface (UI) error.
Issue with the user interface or associated wiring.
Amana dryer code F2E6 indicates motor error. Audited diagnosis findings: user interface failure; main control board failure; loose or damaged…
Amana dryer code F3E6 indicates moisture sensor error. Audited diagnosis findings: open circuit in the moisture sensor; broken or loose…
Indicates a restricted airflow issue. This can be caused by a clogged lint screen or a kinked, crushed, or blocked…
Amana dryer code F4E2 indicates gas valve error. Audited diagnosis findings: open or shorted exhaust thermistor; damaged wiring to the…
Communication error between the user interface and the main control board.
General error requiring a power cycle.
General error requiring a power cycle.
Amana dryer code F8E1 indicates heater relay error. Audited diagnosis findings: power failure or outage.
High limit thermostat error.
Amana dryer code F8E3 indicates inlet thermistor error. Audited diagnosis findings: clogged lint screen or exhaust vent; failed thermistor.
Amana dryer code F8E4 indicates outlet thermistor error. Audited diagnosis findings: unknown component failure.
Amana dryer code F8E5 indicates door switch error. Audited diagnosis findings: unknown component failure, potentially related to the control board.
Amana dryer code F8E6 indicates centrifugal switch error. Audited diagnosis findings: dryer door is open; water hoses for steam feature…
Heater box thermal cut-out (TCO) error.
Motor thermal cut-out (TCO) error.
Gas valve thermal cut-out (TCO) error.
Amana dryer code F8EA indicates line voltage error. Audited diagnosis findings: a problem has been detected by the electronic control…
Amana dryer code F8EB indicates line frequency error. Audited diagnosis findings: a problem has been detected by the electronic control…
Amana dryer code F8EC indicates main relay error. Audited diagnosis findings: a problem has been detected by the electronic control…
User interface (UI) software mismatch.
Main control board software mismatch.
Invalid model configuration.
Amana dryer code F8F0 indicates invalid checksum. Audited diagnosis findings: a problem has been detected by the electronic control board;…
Amana dryer code F8F1 indicates eEPROM error. Audited diagnosis findings: a problem has been detected by the electronic control board;…
Amana dryer code F8F2 indicates program memory error. Audited diagnosis findings: a problem has been detected by the electronic control…
Amana dryer code F8F3 indicates rAM error. Audited diagnosis findings: a problem has been detected by the electronic control board;…
Amana dryer code F8F4 indicates watchdog reset. Audited diagnosis findings: the cause for this error code is not publicly documented.
Amana dryer code F8F5 indicates brownout detected. Audited diagnosis findings: the cause for this error code is not publicly documented.
Amana dryer code F8F6 indicates power surge detected. Audited diagnosis findings: the cause for this error code is not publicly…
Amana dryer code F8F7 indicates stuck key. Audited diagnosis findings: the cause for this error code is not publicly documented.
Communication error with speech module.
Speech module memory error.
Speech module watchdog reset.
Speech module brownout detected.
Speech module power surge detected.
Speech module stuck key.
Speech module communication error with main control.
Speech module invalid model configuration.
Mismatched software versions between control boards.
Amana dryer code F9E3 indicates invalid configuration. Audited diagnosis findings: undocumented error code.
Amana dryer code F9E4 indicates communication error with accessory. Audited diagnosis findings: undocumented error code.
Amana dryer code F9E5 indicates accessory error. Audited diagnosis findings: undocumented error code.
Amana dryer code F9E6 indicates accessory communication error. Audited diagnosis findings: undocumented error code.
Accessory watchdog reset.
Accessory brownout detected.
Accessory power surge detected.
Amana dryer code F9EA indicates accessory stuck key. Audited diagnosis findings: undocumented error code.
Accessory communication error with main control.
Accessory invalid model configuration.
Amana dryer code F9ED indicates accessory memory error. Audited diagnosis findings: internal electronic control fault; miswired house or range connection;…
Accessory program memory error.
Amana dryer code F9EF indicates accessory RAM error. Audited diagnosis findings: internal electronic control fault; miswired house or range connection;…
Accessory invalid checksum.
Amana dryer code F9F1 indicates accessory EEPROM error. Audited diagnosis findings: internal electronic control fault; miswired house or range connection;…
Accessory program memory error.
Amana dryer code F9F3 indicates accessory RAM error. Audited diagnosis findings: internal electronic control fault; miswired house or range connection;…
Accessory watchdog reset.
Accessory brownout detected.
Accessory power surge detected.
Amana dryer code F9F7 indicates accessory stuck key. Audited diagnosis findings: internal electronic control fault; miswired house or range connection;…
Accessory communication error with main control.
Accessory invalid model configuration.
Amana dryer code F9FA indicates accessory memory error. Audited diagnosis findings: main control board failure; thermistor failure; moisture sensor failure.
Accessory program memory error.
Amana dryer code F9FC indicates accessory RAM error. Audited diagnosis findings: main control board failure; thermistor failure; moisture sensor failure.
Accessory watchdog reset.
Accessory brownout detected.
Accessory power surge detected.
This code indicates that the drying cycle was interrupted by a power outage.
Amana
Indicates the status of the air filter.
Indicates the status of the air filter.
Indicates the status of the air filter.
Indicates the status of the air filter.
The refrigerator is in diagnostic or service mode, allowing technicians to test various components.
The condenser coil needs to be cleaned. This indicator light comes on after 3 months of elapsed time as a…
The condenser needs to be cleaned. The "Clean Condenser" indicator light comes on after three months of operation.
Indicates that the cooling function of the refrigerator is turned off.
Indicates that the cooling function of the refrigerator is turned off.
Indicates that the cooling function of the refrigerator is turned off.
Indicates that the cooling function of the refrigerator is turned off.
Main board and refrigerator sensor issue.
Main board and refrigerator sensor issue.
Main board and refrigerator sensor issue.
Main board and refrigerator sensor issue.
Main board and defrost sensor issue.
Main board and defrost sensor issue.
Main board and defrost sensor issue.
Main board and defrost sensor issue.
Multiple sensor failures.
Multiple sensor failures.
Multiple sensor failures.
Multiple sensor failures.
Main control board issue.
Main control board issue.
Main control board issue.
Main control board issue.
Refrigerator and defrost sensor issue.
Refrigerator and defrost sensor issue.
Refrigerator and defrost sensor issue.
Refrigerator and defrost sensor issue.
Refrigerator sensor issue.
Refrigerator sensor issue.
Refrigerator sensor issue.
Refrigerator sensor issue.
Amana Refrigerator Error D9-ILLUMINATED-2 — Defrost sensor issue.
Amana Refrigerator Error D9-ILLUMINATED-3 — Defrost sensor issue.
Amana Refrigerator Error D9-ILLUMINATED-4 — Defrost sensor issue.
Amana Refrigerator Error D9-ILLUMINATED — Defrost sensor issue.
The temperature for a specific compartment is not available or the refrigerator is in a special mode.
Door Switch Problem or Door Not Closing Properly.
Lid will not lock or a lid lock failure has occurred.
One or both of the refrigerator doors have been left open for an extended period.
Indicates that a door has been left open for an extended period.
Indicates that a door has been left open for an extended period.
Indicates that a door has been left open for an extended period.
Indicates that a door has been left open for an extended period.
Door Switch Problem or Door Not Closing Properly.
The appliance is not draining correctly.
The lid is unable to unlock.
General error code. The specific fault is usually identified by a secondary code.
Indicates a problem with the damper control, which regulates the flow of cold air from the freezer to the refrigerator…
Indicates a potential issue with the refrigerator's cooling system or a sensor.
Indicates a potential issue with the refrigerator's cooling system or a sensor.
Indicates a potential issue with the refrigerator's cooling system or a sensor.
Indicates a potential issue with the refrigerator's cooling system or a sensor.
Indicates that the water filter needs to be replaced.
Indicates that the water filter needs to be replaced.
Indicates that the water filter needs to be replaced.
Indicates that the water filter needs to be replaced.
The freezer temperature has exceeded 15°F for 2 hours or the refrigerator temperature has exceeded 60°F for 2 hours. The…
The freezer temperature has exceeded 15°F for 2 hours or the refrigerator temperature has exceeded 60°F for 2 hours. The…
The ice maker is turned off or not functioning correctly.
Off-balance load detected.
Overload. The motor is drawing too much current.
The freezer or refrigerator thermistor circuit is open, the wiring to the thermistors is open, or the L.V. board has…
The freezer or refrigerator thermistor circuit is open, the wiring to the thermistors is open, or the L.V. board has…
The air filter is nearing the end of its life and a replacement should
The air filter is nearing the end of its life and a replacement should
Indicates that the refrigerator has lost power and the freezer temperature has risen.
All temperature indicator lights flash after power is initially plugged in, after a power
All temperature indicator lights flash after power is initially plugged in, after a power
Indicates that the refrigerator is in a self-diagnostic mode.
The air filter needs to be replaced. The air filter icon on the control
The air filter needs to be replaced. The air filter icon on the control
Suds detection. The machine is running a routine to reduce excessive suds.
Showroom mode is activated. The interior lights and display will function, but the cooling system will not operate.
Suds detection. The machine is running a routine to reduce excessive suds.
Indicates that the refrigerator is in a test mode.
Indicates that the internal temperature of the refrigerator or freezer has exceeded a safe level.
Indicates that the internal temperature of the refrigerator or freezer has exceeded a safe
Indicates that the internal temperature of the refrigerator or freezer has exceeded a safe
Indicates that the internal temperature of the refrigerator or freezer has exceeded a safe
Either the freezer or refrigerator thermistor circuit is open. The freezer or refrigerator indicator light shows and temperature indicators 4…
Either the freezer or refrigerator thermistor circuit is open. The freezer or refrigerator indicator light shows and temperature indicators 4…
The water filter needs to be replaced.
Amana refrigerator code C indicates temperature or Sensor Error. Audited diagnosis findings: the temperature display setting has been inadvertently changed…
Control Board or Keypad Error.
Amana refrigerator code E0 indicates ice maker fault. Audited diagnosis findings: main control board failure; loose or damaged wiring connections.
Amana refrigerator code E1 indicates refrigerator Defrost System Error. Audited diagnosis findings: failed defrost heater; faulty defrost thermostat; a general…
Amana refrigerator code E10 indicates refrigerator Defrost Heater Error. Audited diagnosis findings: defrost heater failure; an open circuit in the…
Amana refrigerator code E11 indicates refrigerator Evaporator Coil Error. Audited diagnosis findings: failed evaporator fan motor; ice or other obstruction…
Amana refrigerator code E12 indicates refrigerator Freezer Fan Error. Audited diagnosis findings: failed freezer fan motor; an obstruction is blocking…
Refrigerator Fresh Food Fan Error.
Amana refrigerator code E14 indicates refrigerator Temperature Sensor Error. Audited diagnosis findings: the temperature sensor, also known as a thermistor,…
Amana refrigerator code E2 indicates refrigerator Evaporator Fan Error. Audited diagnosis findings: there is a problem with the fan responsible…
Amana refrigerator code E23 indicates refrigerator Water Filter Error. Audited diagnosis findings: in a refrigerator context, this could point to…
Amana refrigerator code E3 indicates refrigerator Condenser Fan Error. Audited diagnosis findings: the condenser fan, responsible for cooling the compressor…
Amana refrigerator code E4 indicates refrigerator Compressor Error. Audited diagnosis findings: this could be an issue with the compressor itself…
Refrigerator Ice Maker Sensor Communication Error.
Refrigerator Freezer Fan Communication Error.
Refrigerator Fresh Food Fan Communication Error.
Amana refrigerator code E5 indicates refrigerator Thermistor Error. Audited diagnosis findings: the thermistor (a temperature sensor) has malfunctioned, causing the…
Refrigerator Adaptive Defrost Communication Error.
Amana refrigerator code E6 indicates refrigerator Door Sensor Error. Audited diagnosis findings: the refrigerator is unable to correctly detect if…
Amana refrigerator code E7 indicates refrigerator Control Board Error. Audited diagnosis findings: there is a problem with the main electronic…
Amana refrigerator code E8 indicates refrigerator Ice Maker Error. Audited diagnosis findings: ice maker is turned off; ice jam in…
Refrigerator Water Inlet Valve Error.
Indicates an evaporator fan motor failure. The evaporator fan circulates cold air within the freezer.
The air filter is expired and must be replaced. The air filter icon on the control panel will be red…
Amana refrigerator code FD indicates forced Defrost Mode. Audited diagnosis findings: the refrigerator is in a 'Forced Defrost' diagnostic mode.
The air filter is in good condition. The air filter icon on the control panel will be blue.
Communication error between the electronic control boards.
Power Failure. Similar to the 'PO' code, this indicates an interruption in the power supply.
Power Outage. Indicates the refrigerator has lost and regained power, and the freezer temperature has risen to 18°F (-8°C) or…
Indicates the unit is in a periodic test mode.
Amana refrigerator code TE indicates temperature Sensor Error. Audited diagnosis findings: a faulty thermistor; loose or damaged wiring connected to…
Amana
The cycle is suspended because the door was opened.
The cycle has been suspended, usually because the door was opened during operation.
The cycle is suspended because the door was opened.
The cycle has been suspended, usually because the door was opened during operation.
The cycle is suspended because the door was opened.
The cycle has been suspended, usually because the door was opened during operation.
The cycle is suspended because the door was opened.
The cycle has been suspended, usually because the door was opened during operation.
Indicates the completion of a wash cycle and that the dishes are clean.
Indicates the completion of a wash cycle and that the dishes are clean.
Indicates the completion of a wash cycle and that the dishes are clean.
Problem with the heating circuit. The dishwasher is not able to heat the water
Problem with the heating circuit. The dishwasher is not able to heat the water
Problem with the heating circuit. The dishwasher is not able to heat the water to the required temperature.
Problem with the heating circuit. The dishwasher is not able to heat the water
Indicates the completion of a wash cycle and that the dishes are clean.
The control panel is locked to prevent unintended use. If a button is pressed
The control panel is locked to prevent unintended use. If a button is pressed
The wash cycle has finished.
The wash cycle has finished.
The wash cycle has finished.
The wash cycle has finished.
Amana Dishwasher Error DLO — Unbalanced load.
Amana Dishwasher Error DRN-2 — Drain problem.
Amana Dishwasher Error DRN — Drain problem.
Lid cannot unlock, possibly due to an obstruction on top of the appliance.
Drain pump failure.
Indicates a leak has been detected, and the cycle has been canceled.
Indicates a leak has been detected, and the cycle has been canceled.
The cycle has been paused.
The cycle has been paused.
The cycle has been paused.
The cycle has been paused.
Amana Dishwasher Error FRONT-STATUS-LIGHT-BLUE-2 — Washing in-progress.
Amana Dishwasher Error FRONT-STATUS-LIGHT-BLUE-3 — Washing in-progress.
Amana Dishwasher Error FRONT-STATUS-LIGHT-BLUE — Washing in-progress.
Amana Dishwasher Error FRONT-STATUS-LIGHT-RED-2 — Drying in-progress.
Amana Dishwasher Error FRONT-STATUS-LIGHT-RED-3 — Drying in-progress.
Amana Dishwasher Error FRONT-STATUS-LIGHT-RED — Drying in-progress.
Amana Dishwasher Error FRONT-STATUS-LIGHT-WHITE-2 — Cycle completed.
Amana Dishwasher Error FRONT-STATUS-LIGHT-WHITE-3 — Cycle completed.
Amana Dishwasher Error FRONT-STATUS-LIGHT-WHITE — Cycle completed.
Water supply issue. The dishwasher is not receiving enough water or any water at all.
Long drain time, indicating a drain pump system problem.
Lid will not lock.
Lid will not unlock.
Unbalanced load detected.
Unbalanced load detected.
The water is not hot enough to sanitize the dishes.
The water is not hot enough to sanitize the dishes.
The water is not hot enough to sanitize the dishes.
The water is not hot enough to sanitize the dishes.
Suds detection. Appears when too much detergent is used.
Suds detection. Appears when too much detergent is used.
The cycle was interrupted, or the door was not closed within 3 seconds of pressing the Start/Resume button.
The cycle was interrupted, or the door was not closed within 3 seconds of pressing the Start/Resume button.
Excessive suds have been detected in the dishwasher. This is often caused by using
Excessive suds have been detected in the dishwasher. This is often caused by using
Excessive suds have been detected in the dishwasher. This is often caused by using
Excessive suds have been detected in the dishwasher. This is often caused by using
Amana Dishwasher Error UL — Unbalanced load.
Stuck key detected in keypad or keypad connection.
Control software issue - damaged or corrupted memory on control board or incompatible software.
Dispenser electrical problem.
Indicates a dispenser electrical problem.
Control software issue - damaged or corrupted memory on control board, or incompatible software.
Control detected stuck key(s) in keypad or keypad connection.
Open temperature sensing circuit.
Shorted temperature sensing circuit.
OWI (Optical Water Indicator) failed calibration.
Amana dishwasher code 4-3 indicates wash motor not running. Audited diagnosis findings: failed wash motor or circulation pump; obstruction jamming…
Door was not latched within 3 seconds of pressing Start/Resume key.
Control programmed to not start if it suspects the door switch is stuck closed.
Low/no water (mechanical problem).
Fill valve electrical problem.
Amana dishwasher code 6-3 indicates suds/air in pump. Audited diagnosis findings: using the wrong type of detergent (not for automatic…
Amana dishwasher code 6-4 indicates float switch open. Audited diagnosis findings: obstruction under the float switch; stuck float assembly; dishwasher…
Incoming water is too cool.
No heat - heater circuit problem.
Amana dishwasher code 7-2 indicates heater stuck on. Audited diagnosis findings: faulty temperature sensor; stuck relay on the control board;…
Amana dishwasher code 8-1 indicates slow drain. Audited diagnosis findings: clogged drain filter, drain hose, or air gap; improperly installed…
Drain motor electrical problem.
Amana dishwasher code 8-3 indicates drain stuck on. Audited diagnosis findings: faulty drain motor drive circuit on the control board;…
Faulty Control Motor Drive Circuit or Sense Circuit.
Faulty Control Motor Drive Circuit or Sense Circuit.
Indicates a water supply issue, which could be due to a blocked water inlet filter, a kinked or blocked hose,…
Indicates a small leak from the dishwasher.
Indicates a drainage problem, temperature sensor error, or a heating element malfunction causing an abnormally long water heating time.
Indicates an issue with water overflow or leak detection, potentially caused by a faulty float switch, drain pump, or water…
Signals a potential issue with the water heater.
Indicates a problem with the dishwasher motor.
Anti-flooding overflow. This indicates that the anti-flood system has been activated.
Water fill solenoid valve failure. The dishwasher is having a problem with the water inlet valve.
Water drain failure/timeout. The dishwasher is not draining water correctly.
Thermostat fault. There is an issue with the temperature sensor.
Water fill timeout. The dishwasher is taking too long to fill with water.
Water turbine damaged. This relates to an issue with the component that measures water flow.
Temperature timeout fault. The dishwasher is not reaching the correct temperature in the expected time.
Software error. There is a problem with the main control board's software.
Specific error code, meaning not detailed in the provided search results.
Amana dishwasher code F0E2 indicates over suds detected in the dishwasher. Audited diagnosis findings: excessive suds from using the wrong…
Indicates an overload condition.
The dishwasher senses the water temperature is too hot.
Specific error code, meaning not detailed in the provided search results.
Specific error code, meaning not detailed in the provided search results.
Specific error code, meaning not detailed in the provided search results.
Specific error code, meaning not detailed in the provided search results.
Heating element fault. There is an issue with the heating element.
Wash pump failure. The main motor that circulates water is not working correctly.
Main board & Display communication error. There is a communication issue between the main control board and the display.
Main board fault. There is a general fault with the main control board.
Water Flow Error. There's an issue with water flow into the dishwasher.
Virtual sensor error. This relates to a fault in the dishwasher's sensor system.
Indicates a control board failure.
Amana dishwasher code F1E2 indicates internal board failure. Audited diagnosis findings: failed electronic control board; issue with the control board…
Indicates a shorted keypad or a problem with the user interface.
User Interface Mismatch.
Indicates an issue with the appliance control unit, user interface or associated wiring.
Indicates an issue with the user interface or associated wiring.
Specific error code, meaning not detailed in the provided search results.
Amana dishwasher code F3E1 indicates pressure system fault. Audited diagnosis findings: stuck or obstructed float assembly; faulty float switch (water…
Inlet water temperature is too low.
Suggests a problem with the oven temperature sensor or associated wiring.
Indicates an issue with the mini dispenser; detergent should be added manually.
Timer Control Error. The dishwasher's timer control is malfunctioning.
Water Pressure Problem. The dishwasher is experiencing low water pressure.
Detergent Dispenser Lid Issue. There's a problem with the detergent dispenser lid mechanism.
Rinse Aid Sensor Error. The rinse aid sensor is providing inaccurate readings.
Overheating Detected. The dishwasher has detected an overheating condition.
Faulty Turbidity Sensor. The turbidity sensor is malfunctioning.
Inlet Valve Sensor Error. There's a problem with the inlet valve sensor.
Water Filtration System Issue. The dishwasher's water filtration system is not operating correctly.
Drain Hose Blockage. The dishwasher's drain hose is blocked.
Water Quality Sensor Calibration Error. The calibration of the water quality sensor is incorrect.
Indicates a wash motor or circulation problem.
Spray Arm Motor Error. The dishwasher's spray arm motor is malfunctioning.
Indicates a door switch fault.
Indicates the door is not locking properly.
Indicates a lid lock fault where the lid will not unlock.
Amana dishwasher code F5E4 indicates door will not open. Audited diagnosis findings: door is not closing properly due to an…
Amana dishwasher code F6E1 indicates not filling with water. Audited diagnosis findings: main electronic control board failure; loose wiring connection…
Indicates an issue with the appliance control unit, user interface, or associated wiring.
Suds or air in the water system.
Indicates an overfill or float-related condition, possibly due to the dishwasher not being level.
Specific error code, meaning not detailed in the provided search results.
Heating element not working.
Indicates an issue with the appliance control unit, user interface or associated wiring.
Indicates a shifter fault.
Indicates a shifter fault.
Points to a motor issue.
Indicates an issue with the appliance control unit, user interface, or associated wiring.
Suggests an issue with the main router, user interface, or associated wiring.
Amana dishwasher code F8E1-2 indicates slow drain. Audited diagnosis findings: water supply is turned off; kinked or clogged fill hose;…
Indicates an issue with the bulk dispenser.
Indicates that the dishwasher is overfilling with water.
Indicates a water level problem, such as overfilling or a leak.
Amana dishwasher code F9E1-2 indicates drain pump failure. Audited diagnosis findings: clogged dishwasher filter, drain hose, or garbage disposal connection;…
Indicates a drain path issue, possibly related to the garbage disposal connection or a blockage in the drain hose.
The optical water indicator is detecting high levels of water turbidity.
Water supply issue. The dishwasher is not receiving enough water or any water at all.
Indicates that the hot and cold inlet hoses have been installed incorrectly.
Long fill, the washer is taking too long to fill.
Amana dishwasher code PF indicates power failure. Audited diagnosis findings: power failure or interruption during a cycle.
Amana dishwasher code PO indicates power outage. Audited diagnosis findings: a power outage occurred.