How to Fix Frigidaire Washer Error E1-3
Water is not entering the washer or the fill time is slow.
68 repair guides
Choose the appliance, then find the exact code. Every guide leads with what the code means, what to try first, and whether a part or replacement is worth considering.
Frigidaire
Water is not entering the washer or the fill time is slow.
Water is not entering the washer fast enough.
Water leak in the tub or air leak in the pressure sensor air hose.
Problem with the reed switch.
Frigidaire washer code E2 indicates the washer is not draining. Audited diagnosis findings: clogged drain hose; clogged pump filter.
The drain pump relay on the control board has failed.
Problem with the drain pump relay.
The lid is open or there is a door lock problem.
Water level pressure sensor isn't communicating with the electronic control board or there is a pressure sensor calibration problem.
Frigidaire washer code E38 indicates clogged air trap. Audited diagnosis findings: clogged air trap; clogged hose to pressure sensor.
Frigidaire washer code E4-3 indicates the washer is out of balance. Audited diagnosis findings: washer door is not securely closed.
The door remains locked after the cycle is completed.
Control board problem or problem with the door lock circuit.
Frigidaire washer code E44 indicates control board problem. Audited diagnosis findings: main control board failure.
Control board problem or problem with the door lock circuit.
Frigidaire washer code E46 indicates control board problem. Audited diagnosis findings: main control board problem.
The control board thinks the door PTC circuit is open in spin.
The control board thinks the door PTC circuit is closed.
Control detects a problem with the door lock circuit.
Motor overheating or an issue with the water temperature sensor.
Frigidaire washer code E56-2 indicates high motor current. Audited diagnosis findings: high motor current detected; obstructions in the drive system;…
High current on inverter.
High current on motor phase.
No tacho signal for 3 seconds.
High temperature on the heat sink.
High temperature on the heat sink.
High temperature on the heat sink or a motor-related issue.
Communication problem/failure.
Frigidaire washer code E5E indicates communication problem. Audited diagnosis findings: communication problem between the control boards; faulty wiring harness; faulty…
Communication problem/failure.
Incorrect input voltage on the microprocessor.
Cold water is not entering or the control board is not seeing the correct water supply.
Wash NTC (heater) failure.
Water temperature sensor circuit failure.
NTC temperature for the cold water valve is over the limits.
Console control problem.
Console control problem.
User interface board or UI/main board communication failure.
Console or Main Board control problem/failure.
Washer electronic control board internal memory failure or problem with console management.
Frigidaire washer code E95 indicates communication error. Audited diagnosis findings: communication error; faulty main control board.
Washer electronic control board and user interface board mismatch or console management issue.
Incoming power frequency is out of limits.
Incoming line voltage is above 130 VAC.
Excessive foaming due to too much detergent.
Frigidaire washer code EF1 indicates clogged drain pump. Audited diagnosis findings: clogged drain pump.
Frigidaire washer code EF2 indicates too much soap. Audited diagnosis findings: too much soap has been used.
NTC temperature for the hot water valve is over the limits.
Frigidaire
Cooling Cassette filter needs replacement.
Refrigerator thermistor (temperature sensor) is open.
Refrigerator thermistor (temperature sensor) is shorted.
Freezer thermistor (temperature sensor) is open.
Freezer thermistor (temperature sensor) is shorted.
Ice maker thermistor (temperature sensor) is open.
Ice maker thermistor (temperature sensor) is shorted.
Frigidaire refrigerator code EO indicates communication Error. Audited diagnosis findings: a sensor circuit is open; a wire leading to a…
Communication Error between Control Boards
Frigidaire refrigerator code ER-DH indicates defrost Heater Failure. Audited diagnosis findings: the defrost heater element is faulty or broken; the…
Frigidaire refrigerator code ER-DS indicates defrost Sensor Failure. Audited diagnosis findings: the defrost bi-metal thermostat has failed; the sensor attached…
Freezer Fan Motor Failure
Ice Maker Fan Motor Failure
Frigidaire refrigerator code LO indicates low Temperature Alarm. Audited diagnosis findings: a faulty damper control is stuck in the open…
Open Sensor (e.g., Temperature Sensor)
Power Failure. Indicates the unit has lost and regained power.
Shorted Sensor (e.g., Temperature Sensor)
Condenser Fan Motor Failure
Condenser Fan Motor Failure (Alternate Code)
Evaporator Fan Motor Failure